Brain Training 101

Water carries a variety of minerals that impact the quality of your supply, such as calcium and magnesium. Depending on the quantity of these minerals in your water, your water supply is considered either hard or soft. Soft water, for example, contains a lower level of calcium and magnesium. On the other hand, hard water has a relatively high level of calcium and magnesium.

When you have a hard water supply, you can experience several adverse effects on your water quality. That’s why many customers invest in a water softener. So, how do you know if you need a water softener for your supply? Let’s discuss!

What Is a Water Softener?

Water softening is removing the dissolved calcium and magnesium salts that are causing hardness in water.

Do I Need to Soften My Water?

The answer to this depends on the quality of water in your home. While water softeners aren’t required, you can decide whether to add one to your home. Several factors determine whether a softener is recommended by a water quality professional. If your water’s hardness is greater than 7 grains per gallon, then you might want to invest in a water softener to improve the overall quality of your water.

The Hardness of Water

Before you jump into deciding whether you need to soften our water or not, you should understand the hardness of the water. Hard water contains high dissolved minerals, predominantly calcium and magnesium. You can measure the hardness of water using a test kit, or you can contact a professional to do it.

Signs you Need a Water Softener

Here are some signs that indicate you need a water softener:

Staining

Hard water stains are a sign that you need to get your water softened. Hard water contains dissolved minerals and metals, creating unsightly, stubborn stains on your sinks, toilets, and bathtubs or near the drain. They leave white, scaly deposits around your faucets. You can remove these stains by cleaning them with a solution of bleach and powdered dishwasher detergent. You can use the same method to remove white deposits from faucets, or you can spray the deposits with white vinegar, let it sit for a few minutes, and then rinse and wipe thoroughly with a soft cloth.

Higher Utility Bills

Hard water creates clogs and buildup inside your plumbing system, which causes your water heater to consume more energy as it attempts to push the water through pipes. This is how hard water can create a rise in your electricity bills.

Dry Skin and Hair

Hard water can have adverse effects on your skin and hair. The minerals in hard water can leave your skin and hair dry, flaky, and itchy. It can also block your pores, causing pimples, blackheads, and inflammation. Hard water can also make your hair dry, dull, and limp.

Gray or Faded Laundry

Hard water doesn’t work with soap as well as soft water does. Therefore, hard water makes your soap and laundry detergents less effective. It can also leave behind a scummy residue that causes your linens and clothing to fade or become dull or gray.

Contact a Reliable Local Professional for Your Plumbing Needs

If you have a plumbing issue, it’s essential to hire a professional to do the job. Contact a licensed Redlands plumber to schedule an appointment.

While it might be evident that your heating bills go up in the colder months, most people don’t realize that your heat accounts for a 20% increase in your energy bills in winter. Keeping yourself warm and cozy during the winters can sometimes be expensive. But you take some steps to keep your heating bills low. Let’s discuss!

10 Tips to Reduce Your Winter Heating Bills

You can keep your heating bills down by following these ten tips:

1.   Upgrade Your Heating System

With so many new systems on the market, is your heating system energy efficient? Upgrading your heating system can significantly reduce your energy bills if you choose an energy-efficient option.

2.   Add an Energy-Efficient Space Heater

You can also add energy-efficient space heaters to heat smaller rooms. Use the heaters only in the places where needed. Keep the thermostat of your heater at a comfortable temperature. Remember, for every degree you increase your thermostat, you add 10% to your heating bills. There is no need to heat the entire house while you are using only one or two rooms. Space heaters are a great option to save on your overall heating costs.

3.   Conserve on Water

Heating your residential water supply can be the most energy-consuming cost of your household. Maintain the water temperature on your washing machine or dishwasher and wait to run these machines until they are full. Take short showers and switch to water-efficient showerheads. You can also invest in an air source heat pump to save you up to 80% on water heating bills. This is because they re-use the heat around them to be more energy-efficient.

4.   Consider the Size

If your house is not too big, there is no need to get a large heating system. This will only consume more energy and overheat your home. Get yourself energy-efficient heating systems according to the size of your house.

5.   Be Conservative with Your Heat

One of the best ways to keep your bills down is to be conservative with your heat. Lower your heat before you leave your house, and use space heaters to reduce usage. Keep your heat down a few degrees and layer up with warm clothes.

6.   Invest in Energy-Efficient Windows

Loose window seals and older windows can let out all the heat. Investing in double-paned smart windows that retain the heat and keep the cold out of your home can save a significant amount of energy and costs over time. If there are any cracks in the windows, you should also get them sealed right away.

7.   Use Natural Heat

Take in as much sun in the morning and afternoon as possible. Open your curtains to let natural heat and light into your house. Close your curtains at night to keep the heat in.

8.   Turn Your Fan on Auto

Some fans come with an option to switch into heating, cooling, or auto mode. You can typically find this switch on your thermostat. Auto tells your system when to switch on and which way to turn the blades to get the best results.

9.   Seal All Holes and Vents

Any defects or flaws in your ventilation will let your heat escape and require your system to work harder. Fill any cracks in the wall with gap fillers. Make sure the doors and windows are also adequately sealed using weather strips.

10.                 Clean Your Vents

Make sure all heating vents are free of obstacles and clean your ducts regularly to ensure efficiency and keep your system working as effectively as possible.

Contact a Local Heating Company for Your Maintenance and Repairs

If you want to save money on your heating bills and increase your system’s energy, contact a reliable Los Angeles heater repair company to discuss your options.

When buying a new air conditioning, it is important to get the proper system. A new system is an extremely important decision for any homeowner to make. It can be expensive, time consuming, and can have a major impact on whether or not your home is comfortable. People typically expect a smooth running and working air conditioner that helps always keep the house cool and always works, but sometimes that is not the case. The most important things to keep track of are what air conditioner and how the installation is going to happen. Those are the two most important factors since a mistake in either area can lead to an air conditioner that does not work and is not capable of doing the functions that are needed for the project.

On average, new units can last for about 17 years, but it is important, like previously said, to keep track of your system as well as know what you need. Shopping for a new air conditioner can take up more time and effort than you would think, but it is completely worth it so you can have a working and proper functioning system that will last you a long time.

Here are 4 vital points to keep track of and consider when purchasing your new air conditioner system.

1. Buying New Units Online

There are many different ways to go about installing your new air conditioning system. There are contractors that are “all inclusive” where the contractor will sell you the new system as well as install the system into your home. But sometimes, it is the better option to buy your system online and hire a contractor to install the system. This process can be dependent on what brand of system you want andthe prices you find online, and it sometimes can save you lots of money. It is very important, though, to find a professional and licensed contractor before you purchase the system to make sure that you have the right parts and proper people to properly install it.

2. Load Calculation

When buying a new system, you will want to have a load calculation performed on your home. A load calculator helps you figure out what size of system will be appropriate for you. This will help make sure that you do not waste any money on an inefficient system or energy.

3. High Efficiency Models

Recently, high efficiency models have started appearing, but they are much more expensive. If you want to look into these kinds of models, make sure to do your research before buying one.

4. Off Season Air Conditioning Shopping

Many people do not think of this, but if you buy an air conditioner while it is colder outside, like in the winter, it is much more likely that the brands you want will be in stock and sometimes even on sale with a great discount.

Contact Renes Plumbing, Heating & Air Conditioning for all of your air conditioning needs

If ever in need of professional help with air conditioning, contact this Diamond Bar AC company.

As exciting as moving into a new home sounds, the process often comes with a great deal of stress. From packing your belongings to organizing them into your new space, there is a lot to do to get ready to complete a successful move. Most adults also have to manage work and family obligations alongside all the extra work of moving.

The good news is that there are some steps you can take to ease the stress of the moving process. This article will discuss smart and easy ways to move to your new home with as little stress as possible. Let’s dive in!

5 Smart and Quick Tips for Stress-Free Moving

Here are some great tips for a stress-free move.

Declutter and Organize

When you know you are planning to move, it’s best to start getting your things in order as soon as possible. Make a list of all the rooms in your house and start working through each room by decluttering stuff you don’t need. Categorize and organize the items you are keeping so it will be easier to pack your belongings into boxes.

Separate and mark boxes, so it’s also easy to unpack when you get to your new place. For example, organize your closet and pack all shoes into one package, winter clothes into another, and summer clothes into a third box. Label the containers with precisely what’s inside. This will help you know which boxes to unpack first. It will also help your moving company understand where to put your packages when they arrive at your new place.

Know What to Move

Throughout the decluttering and organization process, you will most likely come across things you don’t need. Think about how often you use each item and if you really need them at your new place. Sell or donate what you don’t need. This will save you space and packing time and lighten your move and save you money on movers. You can also get some good money by selling your old stuff online or to a local store.

Take Your Time

Once you know you are going to move, you should start the packing process. Doing a little bit at a time is a great way to avoid stress. Start by packing rooms or items you don’t use frequently or won’t need before you move. Set aside a certain amount of time each week to load a set amount of boxes or a particular space in your home. The more you spread out your responsibilities for the move, the less stress you will have.

Pack Moving Day Essentials Separately

One of the biggest things people forget is to pack a few days worth of clothes and necessities for the transition. Since you’re packing up all your belongings, you need to make sure you have clothes, medication, and toiletries available to you the night before and the morning of your move. You should also pack a few extra days in case something comes up during the move. It will also give you the freedom to relax in your new location if you don’t have the energy to unpack immediately. Don’t forget your charging cables!

Hire a Professional Moving Service

Carefully choose a reputable moving company that will make your moving hassle-free. Study online reviews and past moving experiences and discuss your moving plan with them. Book in advance so you can keep things on track. Make sure that the company you choose has flexibility in case something changes.

Contact Redlands Moving Company for Help with Your Next Move

If you need reliable movers in Riverside, we’re here to help. Contact Redlands Moving Company today for all your moving needs!

Air conditioners in your vehicle are essential, primarily as you work through the hot California summers. While modern cars come equipped with air conditioners, many people don’t stop to think about their car’s AC until something goes wrong.

There are several things you should know about your car’s AC to ensure it works well. Many people don’t realize that air conditioners work to remove hot air from your vehicle rather than pumping it with cold air. This multi-step process requires a properly working machine to work effectively. This article will discuss the ins and outs of your car’s AC unit. Let’s dive in!

How Does Your Vehicle’s Air Conditioning System Work?

When you turn on the air conditioner in your car, warm air is moved into the compressor and through the condenser to be cooled by a refrigerant. It passes through a part called the receiver, where contaminants and moisture are removed. Next, the evaporator inside the dash of your car comes into action and lowers the temperature of the refrigerant. The blower motor blows air over the cold evaporator and pushes cool air into your vehicle. All those intricate parts of the process bring you the cool, refreshing air that keeps you comfortable on hot days.

Now that you know how your vehicle’s AC works, you should know some essential things about maintaining your AC.

How Often Should You Get Your Car AC Inspected?

While we’re on the topic of your vehicle’s AC, think about the quality of air in your car? Over time, your AC can break down and require some maintenance and repairs. If you feel your air isn’t as cool as it once was, you should schedule an appointment with your local mechanic for an inspection. Your vehicle’s AC should be checked periodically to ensure it’s working as it should.

How Often Should I Get My AC System Recharged?

If you want your AC to work at its optimal performance, you should recharge it regularly. Recharging the AC system in your car simply means topping off the refrigerant fluid. If your AC no longer seems to be blowing cool air or isn’t working as well as it once did, it’s time for a recharge. Contact your local mechanic to schedule an appointment.

What is an AC Refrigerant?

Refrigerant is a non-combustible gas called freon used in your car’s AC system to cool the air. Simply put, refrigerant works by turning hot air into cold air. It does this by absorbing and releasing the heat, leaving the cool air behind. Refrigerant is used in all air conditioning appliances.

What Are the Most Important Parts of Your Car’s AC System?

Your vehicle’s AC system is made up of five major components. This includes the compressor, condenser, receiver dryer, expansion valve, and evaporator. These parts work together to remove the hot air from inside your vehicle and distribute cool air to increase your comfort.

Contact Porters Garage for Your Automotive Needs

If you need a reliable Riverside auto repair shop, Porters Garage is here to help! Contact us today to schedule an appointment with one of our expert mechanics.

The plumbing issues found in residential homes come in all shapes and sizes. Whether you have minor problems such as running toilets or clogged drains, or a significant plumbing leak, it’s essential to act fast with plumbing problems. Ignoring common residential plumbing problems can lead to severe water damage that even impacts the structure of your home.

Some issues are simple and easy to deal with, and you can even fix them at home. However, some problems are potentially dangerous and should be left only for professional plumbers. The best way to handle your plumbing problems is to understand the most common issues residential homeowners see. Let’s discuss some common residential plumbing issues and how you can manage them until your local plumber arrives for help.

Common Plumbing Issues Found in Residential Homes

Here are the most common plumbing problems homeowners experience:

1.   Dripping Faucets

One of the most common problems homeowners face is a dripping faucet. Almost every homeowner comes across this issue at some point. While it is typically more nuisance than an emergency, the wasted water from your dripping faucets can significantly increase your utility bills. One dripping faucet can waste more than a hundred gallons of water annually.

Generally, dripping faucets are a result of a broken piece or worn-down washer in your appliance. Anyone can fix the issue with basic skills and the necessary tools. Still, if you aren’t handy, you should call a professional plumber for help.

To fix a dripping faucet that needs a replacement washer, follow these steps:

• Switch off the water supply
• Disassemble the dripping faucet
• Replace the faulty washer
• Reassemble the faucet

2.   Clogged Shower Drain

Another common plumbing issue people come across is the clogged shower drain. Shower or bath drains often become clogged with soap scum or hair buildup. In most cases, a plunger can free the blockage. You may also be able to open the drain and remove the blockage with your hands. Besides this, a combination of baking soda and vinegar can break down most basic drain blockages.

Since clogged drains can get worse with time and become a significant issue when they are more extensive, you should call a professional plumber immediately if the basic at-home tricks don’t work to resolve the problem.

3.   Leaky Pipes

Leaky pipes are a significant plumbing issue because they can cause substantial damage to your floors, walls, furniture, and other belongings. As moisture builds up, you are also susceptible to bug infestations and bacteria growth. Typically, leaks occur where your pipes join. For a temporary fix, you can use tapes and filters to keep the pipes sealed until a plumber comes. If you have a more significant leak, you should contact a local plumber immediately for repairs.

4.   Water Heater Issues

Finally, water heater problems are common with residential homes. Have you ever stepped into what you thought would be a warm shower only to be greeted by cold water? Water heater issues can be a problem for homeowners because they affect your most basic household functions. In most cases, leaks and mineral deposits are responsible for causing issues in your water heaters. If you have a water heater issue, contact your local plumber immediately for a solution.

Contact Plumbing Specialists for Your Plumbing Needs

If you need a reliable plumber in Riverside, we’re here to help! Contact Plumbing Specialists today to schedule an appointment.

When it comes to roofing, most people fail to understand the importance of routine maintenance. Although some homeowners think that regular maintenance programs are a waste of money, they can significantly impact the longevity of your roof. The best way to extend the life of your roof is to invest in a professional maintenance program. Still, there are some steps you can take independently to help maintain your roof. Let’s discuss.

5 Maintenance Tips for Your Roof

Here are some easy maintenance tips to make your roof last long:

1.   Clean Your Gutters

Cleaning your gutters is one of the most basic and effective ways of maintaining your roof. Since debris can quickly end up in your gutters, you need to be sure to clean your gutters. Making sure that your gutters are free of all kinds of blockages and debris all year helps maintain and support the integrity of your roof. Clean gutters allow the water to flow freely down your gutters and away from your home and roof. If possible, all you need to do is get a ladder to clean your gutters after each season. If you can’t do it yourself, professional gutter cleaning services are typically inexpensive.

2.   Trim Back Trees and Landscaping

While lush trees are a great addition to the landscape surrounding your home, they can be a threat to your roof’s integrity. Tree limbs and branches can easily be knocked down during storms or high winds and cause a lot of damage to your roof. They can also provide easy access for animals like squirrels and other critters to invade your space. A great way to maintain the integrity of your roof is to clear away any tree limbs and branches that hang over it.

As soon as you notice tree branches and other landscaping starting to grow close to your roof, trim them back a few feet to ensure they don’t cause any problems during strong winds and storms.

3.   De-Ice Your Roof

De-icing is the process of removing snow from your roof. While this isn’t a problem for everyone, even the slightest snow or ice buildup can create a problem with your roof. This is particularly true if you have an older roof. The weight of this buildup can put additional pressure on problem areas, causing your roof to collapse or break.

4.   Replace Cracked or Missing Shingles

Excessive temperatures, storm damage, and wear and tear can break or crack shingles on your roof. New storms can move in and create progressive damage when you let cracked, or missing shingles go without repair.

Roofs are made to last for decades and protect your property from severe weather conditions, like hurricanes and tropical storms. Still, even new roofs can experience damage when a storm hits your property the right way. To avoid more significant roof damage, take a few minutes to inspect your roof from the ground and check for any cracked or missing shingles. If you notice any issues, call a professional roofer immediately for repairs.

5.   Remove Moss and Mold Growth

Algae, moss, and mold can significantly damage your roof if you let it set in. While these issues are primarily found in areas exposed to excess moisture, they can happen at any time. It’s essential to get rid of any moss and mold before the growth starts to deteriorate and damage your roof.

While you can use a bleach and water mixture to eliminate the issue, you can also apply preventative treatments to avoid future problems. Contact your local roofer to discuss these preventative options.

Need Residential Roof Repairs? Ortiz Roofing Is Here to Help!

If you need a reliable San Bernardino roofer, our team is here to help. Contact Ortiz Roofing to schedule an appointment today!

Your air conditioner is one of the most critical appliances in your home, especially during the sweltering summer months. As with any other appliance in your home, it requires regular maintenance to remain in good working order. Window air conditioning units are particularly susceptible to mold growth, especially inside areas where it is dark and warm. This could be dangerous to your health if left untreated.

Mold growth in your window AC unit can be a significant cause for concern. The best way to avoid an issue is to prevent mold growth from the outset. Routine cleaning of your AC unit can help prevent this problem. Let’s discuss.

How to Clean Your Window AC Unit to Prevent Mold Growth

Cleaning mold in your AC simply requires a straightforward method. Let’s take a look at some easy steps you can take to keep your AC unit mold-free.

1.   Wear a Mask

First of all, you should always wear a mask to avoid coming in contact with anything hazardous. You should also wear gloves when cleaning your AC unit if mold is present.

2.   Turn Off the AC

While this may sound like an obvious point, make sure to unplug your AC unit to avoid safety hazards when beginning the cleaning process. You should also discharge the window air conditioner’s capacitor because it might have stored energy that can give you an electric shock.

3.   Remove the AC Unit

The easiest way to clean your AC unit is to remove it from your window. This allows you to disassemble it and clean it most effectively. Remove any screws that are holding the unit in place using a screwdriver. After removing the unit from the window, place it securely on the floor to begin the actual cleaning process.

4.   Remove the Filters

Now, it’s time to remove the filters. If filters are reusable, you can clean them with water and mild soap. If they are not reusable, you’ll need to replace the filters.

5.   Cleaning the Filters

To clean the filters, fill your sink or bathtub with a few inches of warm water and mild dish soap to let the filters soak. For filthy filters, you can spray hydrogen peroxide and leave it for 15 minutes so that it seeps into each layer of your filter. Scrub both sides of the filter using the scrub brush. Once the filter is clean, hang it to dry.

6.   Use a Vacuum to Remove all the Dust

Before you clean the inside of your device with any type of liquid, use a wet vacuum to remove any polluted water. Remove as much dirt and debris as possible from the unit’s interior. Wipe away any apparent mold growth using a cloth or a sponge.

7.   Spray your AC Unit

Spray your air conditioner with your preferred mold cleaner and scrub any moldy spots you see. If the front grille of your air conditioner has mold or dirt, clean that as well. Allow 10 minutes for the solution to rest on these surfaces before rinsing with warm water and wiping with a wet towel. You can also apply a preventative mold treatment spray and follow the directions as instructed on the bottle.

8.   Allow 24 Hours for Your Air Conditioner to Dry

Allow your air conditioner to dry completely before reassembling and reinstalling. This will ensure that there are no issues with how it works in the future.

9.   Reinstall the AC Unit

Finally, it’s time to reinstall your AC system. Before plugging it back in, double-check that the AC Unit is returned to its original condition and in the right working position to avoid any issues.

Contact Performance Plumbing, Heating, and Air Conditioning, Inc. for AC Repairs

If you need a reliable Pasadena air conditioning repair company, we’re here to help. Contact Performance Plumbing, Heating, and Air Conditioning Inc. today to schedule an appointment.

Dealing with a burst plumbing pipe in your home can be an absolute nightmare! Burst plumbing pipes often cause significant water damage and typically require costly repairs. Most homeowners don’t realize that there are several things you should know to help reduce the impact of a burst pipe on your property.

Several signs indicate you have a burst pipe on your property. Understanding the signs and reacting when a burst pipe occurs can help you limit damage and respond quickly to avoid higher costs for plumbing repairs and damage remediation. This article will explore everything you need to know about burst pipes so you can handle the problem quickly and efficiently. Let’s dive in!

Everything You Need to Know About Burst Pipes

There are several things to take into account when dealing with burst plumbing pipes. Let’s start with warning signs!

Signs You Have a Burst Water Pipe

Typically, before severe damage occurs, you’ll notice several signs that your pipes are damaged and your property is at risk for more significant problems. The most common signs are:

• Pools of water or puddles around your sinks, toilets, or other plumbing appliances
• Loud or unexplained noises coming from your pipes or behind your walls
• Significant fluctuations in water pressure
• High water bills or substantial changes to your water bill for no apparent reason
• Discolored water or foul odors coming from your faucets

How to Deal with Burst Pipes

If you do have a burst pipe, there are some crucial steps you can take to avoid progressive damage while you wait for your plumber.

Turn Off the Water and Drain the Faucets

Shutting off the water supply is undoubtedly the first thing to do when a pipe bursts. When you shut off the main water supply immediately, you can avoid significant water damage to your property. Once you shut off the main valve, you should also open all your faucets to help drain the remaining water from your pipes. This also relieves pressure through your plumbing lines to avoid further damage. Once all the water is drained, your plumber will also be able to quickly identify the source of your leak and provide the necessary repairs.

Locate the Burst Pipe

If possible, try to locate the burst pipe on your property while you wait for your plumber to arrive. Finding the burst pipe immediately can help you take care of water damage quickly to avoid additional costs. Once you find the burst pipe, it’s critical to look around at ceilings, floors, and other areas where water damage can occur. The faster you clean up the water, the less damage you’ll have. If you notice the water still leaking, put a bucket underneath the leak to avoid damage to other parts of your property.

Call Professional Help

You should always call a professional for help when you notice a burst pipe. Experienced plumbers can help you repair or replace the pipes immediately and give you great tips on how to clean up any additional damage. They will also tell you if you need to hire other professionals for repairs, such as an electrician if you have electrical damage.

Begin the Cleanup Process

Whenever you experience a burst pipe, it is crucial to dry up all the water as quickly as possible. The longer it takes for you to clean up the water, the more damage will occur. Waiting to clean up can also lead to the formation of mold and mildew. These bacteria don’t just damage your home, but they can create significant health hazards for your entire family. Start the cleanup process immediately and ask your local plumber for tips on how to avoid bacteria growth.

Contact One Way Rooter for Your Residential Plumbing Needs

If you’re looking for a reliable Plumber in Downey, One Way Rooter is here to help! Contact us to schedule an appointment and discuss your needs.

When unwanted guests such as insects, rodents, and other pests invade your property, it can be stressful. Whether you are a home or business owner, pest infestations can be damaging in many ways. Not only do they cause damage to your property, but they are also a significant source of fear for most people.

Unfortunately, many DIY pest control methods simply don’t work, especially for larger infestations. That’s where a reliable pest control company comes in to help. Before you hire a local company, you want to make sure you find the best fit. Let’s discuss some practical tips to ensure you pick the right pest control company for your next job.

Tips to Find the Right Pest Control Company

The following tips can help ensure that you pick the right pest control company for your infestation.

Check Company Reviews

It’s easy to hop online and do a quick search for pest control companies in your area, but make sure you also do your research. Dive a little deeper into your potential company’s online reviews and customer feedback. Word-of-mouth is a great way to find the right professionals. There’s no better way to tell if a company will do an excellent job than to look at what their current or previous customers have to say about their services.

Ask for Proof of a Professional License

Pest control is not everyone’s cup of tea. To get the right results, you need to ensure that whoever you hire has the proper training to do the job. Any reliable company will be more than willing to show you proof of their license. This will give you the peace of mind that whoever you hire is qualified, trained, and most importantly, legally capable of doing the job.

Ask About Safety

A good pest control company will make safety a primary focus of their work. You need to make sure that you, your family, and your home are safe once the job is complete. Many of the harsh chemicals used in pest control can be dangerous to your family, especially if you have pets or children. Ask about what safety measures they take to ensure that your family is protected. A reliable company will be more than willing to go over their process, so you feel comfortable when you hire them.

Experience

The ideal pest control company matches your needs. Discuss their previous experience. Make sure they have worked jobs with similar pests and have effectively controlled these types of infestations. Ask plenty of questions until you are comfortable with their knowledge and experience. The more experienced a company is, the more likely you will get the results you are looking for to resolve your pest issues.

Talk About Follow-Ups

There’s no such thing as one-time pest control. For many pest infestations, it’s an ongoing process that involves identifying and addressing the source of your pest problem. In some areas, you might have to have your home or business regularly treated for seasonal pests. If a technician tackles your pest problem, there are chances that pests may come back in the future. You want to make sure that you hire someone available for follow-up treatments and future services if you need them.

Contact Mercado & Sons Pest Control for Your Pest Control Services

If you are looking for a reliable Chino Hills pest control company, we’re here to help! Contact Mercado & Sons Pest Control today to schedule an appointment.