Common Causes of AC Problems

Air conditioners are just like any other household appliance. They require routine maintenance and proper care to work effectively. You can face many common problems when using an air conditioner, especially if you ignore fundamental issues. That’s why it’s imperative to contact a professional AC repair company immediately if you notice a problem.

 

The best way to avoid more significant air conditioning issues is to understand the common causes of AC problems. Knowing the roots of the problem can make it much easier to explain the situation to the repairing company and get it fixed quickly. Let’s discuss the most common AC issues residential customers see.

 

3 Common Residential AC Problems

 

The following are some common causes of AC problems:

 

1.   Dirty Condenser Coils

 

A condenser coil absorbs the hot air inside your home and brings it outside through your outdoor AC unit.  Layers of crud and dust can build up on the lid of the condenser coil, causing your AC unit to break down.

 

If you find dirt build-ups on your condenser coil, it is highly advised to thoroughly clean it by washing away all the dirt and crud. Condenser coils can easily be washed by taking a garden nozzle and shooting pressurized water towards the top of the condenser coil. The force of the water is often enough to clean your condenser coil and get your AC working again. It’s a quick, easy, and affordable way to repair your AC issues.

 

2.   Blown Fuses

 

If your AC suddenly stops working without any other explanation, you might have blown a fuse. Flown fuses can occur at any time, and most people don’t realize that there’s a simple source of the problem. Luckily, the solution is fast and easy.

 

There are two fuses in your AC unit. When your system is forced to work hard, one of the fuses can blow and cause a problem for your AC system. A blown a fuse can typically be reset, but even a replacement is easy and affordable to handle.

 

You can quickly check on your own if your fuse is blown or not by checking other plugs on the same circuit. You can also see a blown fuse by looking at the electrical box. A blown fuse will usually be facing a different direction from the others.

 

3.   Frozen Evaporator Coil

 

The evaporator coil is located inside your air handler, and it holds the refrigerant coolant. Evaporator coils require the circulation of warm air around them to function correctly. However, in some scenarios, the evaporator coil can get too cold. Issues such as broken fans, blocked condenser lines, or refrigerant leaks can cause ice to build around your evaporator coil. This will stop your AC from working.

 

Solving this issue is straightforward. As soon as you identify a frozen coil, you should turn off the thermostat and keep the fan on. This will eventually melt off all the ice near the coil, and the air conditioner will start working correctly again. Contact your local AC repair company for a fast and affordable solution if you are worried about handling these issues with DIY methods.

 

Contact All Star Plumbing, Heating, and Air for Your Water Heater Repairs

 

If you need a reliable Los Angeles AC repair company, we’re here to help. Contact All Star Plumbing, Heating, and Air for all your plumbing needs.

Posted in Uncategorized | Leave a comment

All Sliding Glass Doors Arent Equal

There are many options to consider when selecting a sliding glass door. Function, size, material, and style are just a few of the things to consider. Depending on where in your house you would like the sliding glass doors will affect what options you choose.

Why have you decided to install sliding glass doors? Is it to allow natural light in from the outdoors, or to divide an interior room such as a closet? Depending on where the door is to go will impact decisions for size, material, and style. The major components of a sliding glass door are the rail system, one or more stationary panels, and one or more mobile panels. The doors can be designed for either right-handed or left-handed people. For right-handed people the right panel slides to the left. Left-handed doors have the left panel slide to the right. Sometimes there are two outer stationary panels with one mobile panel in the middle. The most common design is a two panel design, but they can be designed with up to four or more panels.

All glass sliding doors are installed on rail systems. Heavier doors are designed to be installed on the bottom rail so the doors are resting on rollers. Lighter doors are installed to hang from the top track. These tracks can be made of vinyl, wood, or metal.

The typical height of a glass sliding door is 80 inches tall. Width can range from 60 inches to 72 inches. A custom size can always be manufactured. Deviating from the standard sizes will incur extra cost and time in your project. Staying with standard sizes will enable you to potential buy in stock doors and rail systems. Additional panels can be added to adjust to the size of your opening. The larger the panel the heavier it will be. If you have a wide opening it is suggested to use more than two panels to prevent the doors from being too heavy.

Common materials used in glass sliding door frames are wood and metal. Picking the right material will affect how your doors look. Fiberglass is a popular choice as it is lightweight and durable. Steel is the strongest material, while wood provides a warm, welcoming look. Different frames can provide different aesthetics to you doors. You can go from a modern look, to French country side, to farm house. The clear portion can be made from glass, which is heavy and fragile. Newer sliding glass doors are actually made from a clear fiberglass that is more durable and lightweight than glass.

Are you ready to talk to a professional about installing sliding glass doors in Riverside, CA? Choosing a professional to design and install your sliding glass doors will make sure your new doors are made of quality materials, and will fit perfectly. Using a company will also provide you peace of mind should something happen to your doors. Just call the company to have your doors easily repairs, or any broken parts replaced.

Posted in Uncategorized | Leave a comment

6 Things Everyone Should Know Before Refinancing Your Mortgage

While most people who own homes may want to restructure all of their finances based on low mortgage interest rates, everyone’s decision to refinance should be based on your personal finances and the financial circumstances you are in. The mortgage rates of the week should not make you decide whether or not you should refinance because you may not have the finances to do so.

 

 

Here are 6 important things everyone should know about before refinancing your mortgage.

 

 

  1. Know the equity of your home

 

The first main qualification you have to know in order to refinance your home is the equity of the home. Depending on your home, renovations on your home, and the location of your home, your equity rises and lowers. Refinancing with low or no equity on your home is not usually possible while refinancing with middle or high equity on your home is likely to always get approved. If you do have a low equity, it is possible to refinance through certain government programs.

 

 

  1. Know your credit score

 

Over the past few years, lenders have become increasingly strict and must require that you have a good credit score. But even then, most people with good credit scores may be stuck with a higher interest rate similar to one that a person with a lower credit score would have. Usually a lender will want someone to have a credit score of around 760 or higher to qualify for one of the lower or lowest interest rates.

 

 

  1. Know what your debt to income ratio is

 

Most people do not think of this, but this is something lenders look into quite a bit. If the lenders see that your debt to income ratio is not looking too good, it is likely they will not approve you for a new loan, even if you have a good credit score. Your debt to income ratio should be around 36% or less in order to be likely to get accepted for refinancing.

 

 

  1. Know the costs of refinancing

 

It is important to know the costs that come with refinancing when you want to. It usually costs about 5% of the total loan amount. Most lenders do require this cost in order to make some money off of the loan, but there are possible loans that lenders provide that do not have that cost. But with that no cost loan, that means that it is likely that the loaner will make you pay a higher interest rate.

 

 

  1. Know your break even point

 

It is important to calculate your break even point which is the point where the costs of refinancing are covered by your monthly savings.

 

 

  1. Know your taxes

 

A few consumers rely on the mortgage interest deduction to reduce their total federal income tax bill because if you refinance and can begin paying lower and lower interest rates, your tax deduction may be lower, so it is important to watch all of that.

If ever in need of professional help with refinancing, contact this Lancaster refinance company.

 

Posted in Uncategorized | Leave a comment